10GBASE-T SFP+ Copper Transceiver Hot Pluggable, 10Gb/s, Cat-6a/7 UTP Cable, 30 BT-SFP-10GRJ45
10GBASE-T copper SFP+ transceiver is a high performance, cost effective integrated duplex device compliant with the 10GBASE-T standards as specified in IEEE 802. 3-2006 and IEEE 802.3an for bi-directional communication up to 30 meters reach over cat 6a/7 cable.All four pairs in the cable are used with symbol rate at 2500Mbps on each pair.
Features
- Up to 10Gb/s bi-directional data links
- Hot-plugg able SFP+ footprint
- Commercial case temperature range (0°C to +70°C )
- Fully metallic enclosure for low EMI
- Power dissipation≤2.5W
- Compact RJ-45 connector assembly
- +3.3V single power supply
- Access to physical layer IC via 2-wire serial bus
- 10GBASE-T operation in host systems with XGMII interface
- Smaller Form Factor: Interoperable with any SFP+ cage and connector system
- SFF-8431 and SFF-8432 MSA Compliant
- Compliant with IEEE Std 802.3an-2006
- Compliant with FCC 47 CFR Part 15, Class B
- Lower EMI Emissions
- RoHS Compliant Products
Applications
- 10 Gigabit Ethernet over Cat 6a/7 cable
- Legacy Networks
- Switch/Router with 10GBASE-T SFP+
- Other Rack to Rack connections
General Specifications:
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Units |
Notes/Conditions |
|
Data Rate |
BR |
100 |
|
10,000 |
Mb/s |
IEEE 802.3an compatible. |
|
Cable Length |
L |
|
|
30 |
m |
Category 6a/7 UTP. BER <10-12 |
Environmental Specifications:
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Units |
Notes/Conditions |
|
Operating Temperature |
Top |
0 |
|
70 |
°C |
Case temperature |
|
Storage Temperature |
Tsto |
-40 |
|
85 |
°C |
Ambient temperature |
Mechanical drawing:
Mechanical Dimensions of Transceiver
Safe Use Recommendations:
10G copper SFP+ has a power draw from 2.0W up to 2.5W dependent upon cable length and SFP+ case temperature. Due to the unique power usage from this module, we offer these recommendations for safe use:
- Do not fill any more than 30% of the allotted switch ports to the 10G Copper SFP+
- Where possible, leave the adjacent SFP+ port empty
- The 10G Copper SFP+ can get hot to the touch due to the higher power consumption. This will not damage the SFP+ or the SFP+ port. However, care should be taken when handling a part when it is removed from a switch after time in
10Gbase DAC, 10G Copper SFP+,10G Optical SFP+ Compare：
|
Product Type |
SFP+ Direct Attach Cable |
SFP+ Copper Transceiver |
SFP+ Optical Transceiver |
|
Compliance |
10GBASE-KR |
10GBASE-T |
10GBASE-SR |
|
Connector Type |
Integrated/None |
RJ-45 |
LC (Typical) |
|
Medium Type |
Copper Twin Coaxial |
Twisted Pair |
Optical Fiber |
|
Reach |
UP to 10m |
UP to 30m |
UP to 300m and over |
|
Application Feild |
Switch to Switch connections(In one Rack) |
Rack to Rack Connections(In one Room) |
Building to Building Connections, City to City |
|
Unit Cost |
Low |
Moderate |
Moderate |
|
Power dissipation |
0.5W Max |
2.5W Max |
1.5W Max |
|
Extra Infrastructure |
None |
Copper Infrastructure |
Fiber Infrastructure |
|
Solution Cost |
Moderate |
Moderate |
Moderate |